Southern California Welding Training and Testing Center - 2020 Annual Report Summary

Institution Data:

1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Street Address (Physical Location): 1641 Pacific Ave. Suite #94

5. City: Oxnard

6. State: CA

7. Zip Code: 93033

8. Form of business organization of this institution: For profit corporation

9. Number of Branch Locations: 0

10. Number of Satellite Locations: 0

11a. Is this institution current with all assessments to the Student Tuition Recovery Fund? Yes

11b. Is this institution current on Annual Fees?: Yes

12. Is your institution accredited by an accrediting agency/agencies recognized by the United States Department of Education? No

13. If your institution has specialized accreditation from a recognized United States Department of Education approved specialized/programmatic accreditor? N/A

14. Has any accreditation agency taken any final disciplinary action against this institution in the reporting year? No

15. Does your institution participate in federal financial aid programs under Title IV of the Federal Higher Education Act? (This includes federal loans and grants) No

16. Does your institution participate in veterans' financial aid education programs? No

17. Does your institution participate in the Cal Grant program? No

18. Is your institution on California`s Eligible Training Provider List (ETPL)? Yes

19. Is your institution receiving funds from the Work Innovation and Opportunity Act (WIOA) Program? Yes

20. Does your Institution participate in, or offer, any other state or federal government financial aid programs? (i.e., vocational rehab…) Yes

20a. You indicated "Yes" for #20, please provide the name of the financial aid program below: California Department of Rehabilitation

21. Provide the percentage of institutional income during this Reporting Year that was derived from public funding: 7

22. Does your Institution participate in, or offer any non-government financial aid programs? (i.e., private grants/loans, institutional grants/loans): No

23. The percentage of institutional income in the reporting year that was derived from any non-government financial aid: 0

24. Enter the most recent three-year cohort default rate reported by the U.S. Department of Education for this institution, if applicable: 0

25. Provide the percentage of the students who attended this institution during this Reporting Year who received federal student loans to help pay their cost of education at the school: 0

27. Total number of students currently enrolled at this institution. Indicate the number of students attending and/or enrolled in all programs at your institution (minus the number of students who cancelled during the cancellation period) January 1st through December 31st: 27

28. Number of Doctorate Degree Programs Offered? Indicate the number of Doctorate degree Programs the institution offered for the reporting year. (Number of Programs not Students): 0

29. Number of Students enrolled in Doctorate programs at this institution? Indicate the number of students enrolled and/or active in all Doctorate programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

30. Number of Master Degree Programs Offered? Indicate the number of Master degree Programs the institution offered for the reporting year. (Number of Programs not Students): 0

31. Number of Students enrolled in Master programs at this institution? Indicate the number of students enrolled and/or active in all Master programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

32. Number of Bachelor Degree Programs Offered? Indicate the number of Bachelor degree Programs the institution offered for the reporting year. (Number of Programs not Students): 0

33. Number of Students enrolled in Bachelor programs at this institution? Indicate the number of students enrolled and/or active in all Bachelor programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

34. Number of Associate Degree Programs Offered? Indicate the number of Associate degree Programs offered for the reporting year. (Number of Programs not Students) : 0

35. Number of Students enrolled in Associate programs at this institution? Indicate the number of students enrolled and/or active in all Associate programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

36. Number of Diploma or Certificate Programs Offered? Indicate the number of Diploma or Certificate Programs offered for the reporting year. (Number of Programs not Students): 40

37. Number of Students enrolled in diploma or certificate programs at this institution? Indicate the number of students enrolled and/or active in all diploma/certificate programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 27

Institution's Website: https://socalweldtrainingschool.org/

School Performance Fact Sheet

Catalog

Program Data:

1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: Aerospace Welder

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $21,030.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1102 GMAW I (MIG the Basics Flat and Horizontal)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $985.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1109-E GTAW VIII (TIG Aerospace applications Level III)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,275.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1114-A GTAW V (Expert bevel pipe small diameter pipe)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,475.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1116-B FCAW III (Innershield the basic flux core)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,595.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1106 GTAW I (TIG the basics steel)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,150.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1104 GMAW III (MIG on Tubing)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $985.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1109-A GTAW IV (TIG expert tubing)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,420.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: Combination Welder/Fabricator

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $15,752.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 2

13. Number of Students Available for Graduation: 2

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1111 SMAW II (Arc advanced plate 3G and 4G)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,350.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1109-D GTAW VII (TIG Aerospace applications Level II)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,275.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1121 FABRICATION IV (Fabrication with sheet metal)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,150.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: Structural Welder

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $18,800.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 9

13. Number of Students Available for Graduation: 9

14. Number of On-time Graduates: 1

15. Completion Rate: 11.11

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 3

20. Graduates Employed in the Field: 2

21. Placement Rate: 66.67

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 2

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 2

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 3

44. Graduates Employed in the Field: 2

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 1

$35,001 - $40,000: 1

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1125 BLUEPRINT III (Advanced Welding Prints)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $695.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1118 FABRICATION I (The fundamentals of fabrication)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,250.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1119 FABRICATION II (Fabrication with tubing)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,150.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1114-B GTAW V (Expert bevel pipe large diameter pipe)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,475.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: Automotive Welder

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $10,760.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1113-A SMAW IV (Expert pipe, uphill small diameter pipe)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,275.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1123 BLUEPRINT I (Introduction Welding Prints)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $695.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1116-A FCAW II (Outershield flux core bevel plate)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,595.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1109-B GTAW V (TIG expert tubing)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,420.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1117 FCAW IV (Innershield certification preparation)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,755.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 1

15. Completion Rate: 100

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1122 LADBS (Certification preparation)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $695.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 2

13. Number of Students Available for Graduation: 2

14. Number of On-time Graduates: 2

15. Completion Rate: 100

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1115 FCAW I Outershield (The basics flux core plate)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,450.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1107 GTAW II (TIG advanced aluminum)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,390.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1105-A GMAW IV (MIG certification preparation steel)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $985.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1110 SMAW I (Arc the puddle fundamentals)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,455.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 1

13. Number of Students Available for Graduation: 1

14. Number of On-time Graduates: 0

15. Completion Rate: 0

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1112 SMAW III (Arc advanced pipe downhill)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,585.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1105-C GMAW VI (MIG certification preparation stainless)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,560.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1105-B GMAW V (MIG certification preparation aluminum)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,460.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1113-B SMAW IV (Expert pipe, uphill large diameter pipe)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,275.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1120 FABRICATION III (Fabrication with pipe)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,250.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1108 GTAW III (TIG advanced stainless)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $1,525.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: Certified General Welder

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $15,040.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 14

13. Number of Students Available for Graduation: 14

14. Number of On-time Graduates: 2

15. Completion Rate: 14.29

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 7

20. Graduates Employed in the Field: 6

21. Placement Rate: 85.71

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 6

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 6

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 1

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 7

44. Graduates Employed in the Field: 6

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 1

$30,001 - $35,000: 1

$35,001 - $40,000: 1

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 1

$60,001 - $65,000: 1

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1101 OAW (Running a bead)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $695.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1124 BLUEPRINT II (Intermediate Welding Prints)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $695.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1109-C GTAW VI (TIG Aerospace applications Level I)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $2,275.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: WLDG 1103 GMAW II (MIG advanced vertical & overhead)

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $985.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0


1. Report Year: 2020

2. Institution Code: 79461424

3. Institution Name: Southern California Welding Training and Testing Center

4. Name of Program: Pipe Welder

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: Welding Technology/Welder.

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4121 - Welders

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $20,360.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: N/A

17. 150% Completion Rate: N/A

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

$0 - $5,000: 0

$5,001 - $10,000: 0

$10,001 - $15,000: 0

$15,001 - $20,000: 0

$20,001 - $25,000: 0

$25,001 - $30,000: 0

$30,001 - $35,000: 0

$35,001 - $40,000: 0

$40,001 - $45,000: 0

$45,001 - $50,000: 0

$50,001 - $55,000: 0

$55,001 - $60,000: 0

$60,001 - $65,000: 0

$65,001 - $70,000: 0

$70,001 - $75,000: 0

$75,001 - $80,000: 0

$80,001 - $85,000: 0

$85,001 - $90,000: 0

$90,001 - $95,000: 0

$95,001 - $100,000: 0

Over $100,000: 0

Branch Data:

No Branch Data was inputted by this Institution.

Satellite Data:

No Satellite Data was inputted by this Institution.